|
|
|
The EWP150 is designed for remote mounting in the engine bay to satisfy higher horsepower, turbocharged, supercharged and ‘worked’ engines cooling needs.
The compact EWP®150 alloy unit is manufactured with -AN16 (12) internal inlet and outlet threads for neat, tight screw-in fitting applications.
This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance accessory increases power to your vehicle’s drive wheels and improves coolant temperature control.
Specifications:
12 Volt Pump
Operating voltage 3V DC to 15V DC
Maximum current 10A @ 13V
Max flow rate 150 L/min (39.63 US gal/min) @ 13V DC
Operating temp. -40° to 130°C (-40° to 266°F)
Clockwise centrifugal with volute chamber
Pump weighs 1,170 grams (2.6 lb)
Aluminium (Powder Coated) case
Burst pressure 500 kPa (72.5 psi)
Seal Ceramic face seal
Not self-priming
Fits hose sizes 35mm to 51mm (1⅜” to 2”) Inlet & Outlet -16AN (12)
Push-On fitting Size EWP Inlet & Outlet 38mm, with 3mm Sleeve (#8510) 44mm, with 6mm Sleeve (#8511) 51mm
|