|
Click image to enlarge
|
|
ExtremeAire Heavy Duty Compressor sets the standards for high output compressors. By utilizing a 3/4 horsepower fan cooled motor, overheating is a thing of the past. Designed to fill the largest 4WD tyres or the highest-pressure RV tyres, this unit can fill tyres continuously with no fear of motor burnout. With a 150psi working pressure, you can fill air tanks and run some air tools.
For clean air in the dirtiest environments, the ExtremeAire uses an oversize UNI-Filter that is crush proof, washable and reusable. All major motorcycle teams use UNI-Filters for Baja and motocross racing. In addition, the fan shaft has a sweeper filter to keep dirt and debris out of the motor and brushes, at the same time, allowing moisture and condensation to escape.
The ExtremeAire is permanently lubed with sealed bearings so it can be mounted in any position making installation much easier. Every ExtremeAire utilises stainless steel fasteners Loctited for a long and trouble free life in the highest vibration applications. Uses for the ExtremeAire include 4WD, RV, Agricultural, Construction, Motorsports and much more. No other 12-volt compressor has the speed, continuous duty cycle, output, pressure rating, and reliability that the ExtremeAire can deliver.
Tech Specs:
Continuous duty cycle
3/4 horsepower motor
30-amp draw at 35psi
40-amp draw at 150psi
113 liters per minute (4 cfm) free flow rate
150psi max working pressure
Can be mounted upside down
356mm (14 inches) long (310mm excluding filter), 150mm (6 inches) wide, 230mm (9 inches) tall
Mounting holes are 125mm x 175mm
Weighs just under 8kg
NB: Tyre and tank inflation hardware not included
Wiring must be in accordance with the instructions to prevent motor damage or premature motor fallure.
Air filter must be kept clean and free from obstruction.
View typical installation
NB: One way check valve must be used when connected to an air reservoir.
|
