|
Click image to enlarge
|
|
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers.
The Multi Chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
This 10 amp charger can be used as a power supply which is great as a memory saver when changing your vehicle battery so you don’t lose important radio and computer information. You can also run 12V appliances direct from the battery clamps up to the rated 10 amp output, ideal for use around the house.
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode. Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard. In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
Specification
TYPE 7 stage
INPUT 240VAC, 50Hz
INPUT POWER 288W
OUTPUT VOLTAGE 12V
OUTPUT CURRENT 10A
MINIMUM START VOLTAGE 2.5V
BACK DRAIN 1mA
CHARGE CONTROL DESULPHATION High Frequency Pulse charge up to 11V
SOFT START 5A up to 12V
BULK 10A up to: 14.1V (GEL); 14.4V (AGM); 14.7V (WET); 14.7V (CALCIUM)
ABSORPTION Constant voltage until current drops to 1.5A
EQUALIZATION Contact current (2.0A) up to 16V then hold for 1 hour or 12 hour timeout
ANALYSIS Monitors battery for 90 sec
RECONDITION Contant current (1.5A for 4 hours limited to: 14.1V (GEL); 14.4V (AGM); 16V (WET); 16V (CALCIUM) ; FLOAT 13.7V
POWER SUPPLY SET VOLTAGE 13.8VDC
MAXIMUM CURRENT 10A
BATTERY RANGE: DEEP CYCLE 70-200Ah; AUTOMOTIVE 450-1000CCA; MARINE 500-1200MCA
Dimensions 202mm x 61mm x 108mm
WEIGHT 1.15Kg
|
