Click image to enlarge
Coil Strut Spacer 25mm - Multi fit for many Ford/Holden/Isuzu/Mazda/Toyota - Pair.
Gives approx. 37mm lift.
Installation of Coil Strut Spacers is the ideal way of generating lift on vehicles with strut front end. Coil Strut Spacers bolt to the top of the Strut, and maintain full articulation of the front end.
Using these spacers, you are able to lift the front end a little more than with conventional springs and even out any 'nose-dive' appearance while still using stock suspension, or increase the height of your aftermarket setup.
Sold as a pair with hardware included.
25mm thick will provide approximately 50mm of lift.
NB: OE top cap roll pin will need to be removed where fitted.
2 x Coil Strut Spacers
6 x Nuts, studs & Washers
These spacers are designed to fit:
Ford Ranger PX MK1 (9/2011-2015) and MK2 (2015 on)
Holden Colorado RG 2WD and 4WD 2012-on
Holden Colorado 7 2012-on
Isuzu D-MAX TFR 2012-on
Isuzu MU-X 2013-on
Mazda BT-50 MK1 (11/2011-2015) and MK2 (2015-on)
Toyota Landcruiser KZJ9#, RZJ9#, VZJ9#, strut front end with coil over suspension 4/96-11/08
Toyota Surf 185