|
Click image to enlarge
|
|
Suitable for a wide variety of 12V DC applications, the VSR senses the input voltage and automatically connects/disconnects the appliance or circuit at pre-set voltages. Fully sealed to IP66 and surge protected, the VSR features a manual override function allowing the user to engage the solenoid from as low as 10V. VSR units are ideal for dual battery setups as they enable the batteries to be paralleled for high power usage, eg jumpstarting or winching.
Charging current 200A Continuous
400A Peak
Cut-in voltage 13.4V
Cut-out voltage 12.8V
Cut-out delay 8 seconds
Min operating voltage 10V
Charge type ParallelControl MCU
Mounting Surface/firewall
Current draw Charging 680mA, standby 10mA
Ingress protection IP66
Recommended fuse 250A
Minimum cable size 32mm2 (2 B&S)
L.E.D charge indication
|